Frequently asked property | ||
---|---|---|
Frequently asked property Tested acc. to ISO 1183 | g/cm³ | 1.41 |
Temperature for usage in air | °C | 140 |
Temperature for usage in air Tested acc. to ISO 60093 | Ohm*m [≥] | 10^13 |
Tensile modulus of elasticity Tested acc. to ISO 527-2 | MPa | 2600 |
Mechanical properties | ||
---|---|---|
Tensile stress at yield
[v = 50 mm/min] Tested to ISO 527-2 |
MPa | 63 |
Tensile stress at break
[v = 50 mm/min] Tested to ISO 527-2 |
MPa | 63 |
Nominal elongation at break
[v = 50 mm/min] Tested to ISO 527-2 |
MPa | 31 |
Ball indentation hardness
[value at 30 sec.] Tested to ISO 2039-1 |
MPa | 140 |
Rockwell hardness
[value at 30 sec.] Tested to ISO 2039-1 |
M 84 | |
Charpy impact strength
[+ 23 °C] Tested to ISO 179/1eU |
kJ/m2 | 220 |
Charpy impact strength - notched
[+ 23 °C] Tested to ISO 179/1eA |
kJ/m2 | 8 |
Thermal properties | ||
---|---|---|
Temperature for usage in air | °C | 105 |
Minimum service temperature in air | °C | -40 |
Heat distortion temperature (HDT A process) | °C | 96 |
Coefficient of linear expansion
(longitudinal, 23-60 °C) Tested to ISO 11359 |
10^(-4/K) | 1.1 |
Thermal conductivity
(+ 23 °C) Tested to DIN 52612 |
W/(K*m) | 0.31 |
Flammability according UL standard
(Thickness 3 and 6 mm) Tested to UL 94 |
Klasse | HB |
Vicat softening temperature
(VST/B/50) Tested to ISO 306 |
°C | 150 |
Melting point
DSC, 10 K/min). Tested to ISO 3146 |
°C | 165 |
Physical properties | ||
---|---|---|
Moisture pick-up till saturation
(in normal climate 23 °C / 50% r.h.) Tested to ISO 62 |
% | 0.2 |
Water absorption till saturation
(in water at 23 °C) Tested to ISO 62 |
% | 0.8 |
Food compliance Tested to EU-VO 10/2011 | yes | |
Food compliance Tested according to FDA | yes |
Electric properties | ||
---|---|---|
Specific surface resistance
[>] Tested to IEC 60093 |
Ohm | 10^13 |
Dielectric constant
At 1 MHz Tested to IEC 602250 |
10^6 Hz | 3.8 |
Dielectric constant
At 100 Hz Tested to IE C 602250 |
10^2 Hz | 3.8 |
Dissipation factor
At 1 MHz Tested to IEC 602250 |
10^6 Hz | 0.008 |
Dissipation factor
At 100 Hz Tested to IE C 602250 |
10^2 Hz | 0.003 |
Dielectric strength K20/K20
(in transformer oil) Tested to IEC 60243-1 |
kV/mm | 20 |
Comparative tracking index (CTI) Tested to IEC 60112 | 600 |
We use cookies to deliver personalized content for you. If you agree, just press "Agree". Otherwise only technically necessary cookies will be set and your surf behaviour will not be tracked.
More information on the use of cookies can be found in our privacy policy.