Product comparison
| Frequently asked property | + | Verification | ||||
|---|---|---|---|---|---|---|
| Density g/cm³ | ISO 1183 | |||||
| Temperature for usage in air °C | ||||||
| Specific insulation resistance Ohm*m [≥] | IEC 60093 | |||||
| Tensile modulus of elasticity MPa | ISO 527-2 | |||||
| Physical properties | + | Verification | ||||
|---|---|---|---|---|---|---|
| Moisture pick-up till saturation % | ISO 62 | |||||
| Water absorption till saturation % | ISO 62 | |||||
| Food compliance EU-VO | EU-VO 10/2011 | |||||
| Food compliance FDA | FDA | |||||
| Mechanical properties | + | Verification | ||||
|---|---|---|---|---|---|---|
| Tensile stress at yield MPa [v = 50 mm/min] | ISO 527-2 | |||||
| Tensile stress at break MPa [v = 50 mm/min] | ISO 527-2 | |||||
| Nominal elongation at break MPa [v = 50 mm/min] | ISO 527-2 | |||||
| Flexural modulus of elasticity MPa | ISO 178 | |||||
| Ball indentation hardness MPa [value at 30 sec.] | ISO 2039-1 | |||||
| Rockwell hardness [measured with test pieces 10 mm thick] | ISO 2039-2 | |||||
| Charpy impact strength kJ/m2 [+23°C] | ISO 179/1eU | |||||
| Charpy impact strength - notched kJ/m2 [+23°C] | ISO 179/1eA | |||||
| Electric properties | + | Verification | ||||
|---|---|---|---|---|---|---|
| Specific surface resistance Ohm [ > ] | IEC 60093 | |||||
| Dielectric constant at 1 MHz 106 Hz | IEC 602250 | |||||
| Dielectric constant at 100 Hz 102 Hz | IEC 602250 | |||||
| Dissipation factor at 1 MHz 106 | IEC 602250 | |||||
| Dissipation factor at 100 Hz 102 | IEC 602250 | |||||
| Dielectric strength K20/K20 kV/mm | IEC 60243-1 | |||||
| Comparative tracking index (CTI) | IEC 60112 | |||||
| Thermal properties | + | Verification | ||||
|---|---|---|---|---|---|---|
| Temperature for usage in air °C | ||||||
| Minimum service temperature in air °C | ||||||
| Heat distortion temperature °C | HDT A process | |||||
| Coefficient of linear expansion 10(-4/K) | ISO 11359 | |||||
| Thermal conductivity W/(K*m) | DIN 52612 | |||||
| Flammability according UL standard Class | UL 94 | |||||
| Vicat softening temperature °C | ISO 306 | |||||
| Melting point °C | ISO 3146 | |||||